Best 8 metal stamping companies 2023

The metal stamping process uses cold-forming processes to make metal parts out of steel sheets or stock into unique shapes using cold-forming processes. There are a number of different metal stamping techniques available, but all of them involve some combination of sharp tools and pressure, resulting in parts being cut out of sheet metal, the creation of cutouts in metal pieces, or the application of markings or textures. The metal stamping process is used to create precise, two-dimensional pieces as well as to transform sheets into three-dimensional components by transforming them into precise, two-dimensional shapes.

What do you need for metal stamping?

You’ll need a number of tools and paraphernalia to begin metal stamping, just like you would with any other new project. If you intend to do a lot of metal stamping for a long time, then these items should be more like investment pieces since once you acquire the equipment, it should last for a very long time. This can be a pricey hobby or craft, but once you do, it will be a very worthwhile investment!

The following are all items you can easily find in craft stores or on the internet. It’s also possible to purchase starter kits that will usually contain most of what you need:

• The stamping hammer
• Metal stamps (letters, numbers, icons, shapes)
• Stamping block
• Metal tags/blanks
• Stamping tape
• Polishing cloth

What is metal stamping vs engraving?

Metal stamping is a process of creating parts from a flat sheet of metal using a die and a press. It is a cost-effective solution for producing large batches of the same parts and typically involves the use of a die containing the stamping image and a press that applies a huge force to the die, creating the actual parts.

Engraving is a process that uses a variety of tools to cut or engrave an image into the surface of a metal object. It is typically used to create intricate designs and is often used to create logos or unique designs on jewelry and other items. Engraving typically involves the use of a rotating tool that is manually guided over the surface of the object to create the desired design.

Best 8 metal stamping companies 2023

In the industry of metal stamping, there are a number of companies that provide professional metal stamping services with a wide range of capabilities and equipment within their facilities, like the companies below.

Tenral

Website: https://www.tenral.com/

Tenral was founded in 2005 as a small metal stamping manufacturer and supplier, providing a small number of domestic customers with simple metal stamping parts. PinCheng Hardware Products (the predecessor to Tenral) was founded in 2005. As the company continued to grow, their customer base continued to expand. Therefore, they decided to separate their company in 2010 and establish Tenral. The mainland Chinese business was overseen by Pinching, the international business by Tenral, while production remained the same. Their expansion strategy includes acquiring stakes in sheet metal fabrication and CNC machining companies, and they have expanded production into these fields. Over 80 people work at dozens of their manufacturing facilities, which cover 70,000 square feet. A few years ago, they set up an internal tool shop to meet the demands of customers who needed complex precision stamping tools.

Keatsmfg

Website: https://www.keatsmfg.com/

Bert and Glenn Keats founded the Keats Manufacturing Company on October 1, 1958, in Chicago, on Cicero Avenue on the northwest side. As a result, Keats Manufacturing started as a small storefront facility in Chicago with two machines and three employees. However, through the years, their company has grown significantly as a result of customer demand and their variety of products.

Matenaer

Website: https://www.matenaer.com/

The Matenaer Corporation was founded in 1942 and is a Wisconsin-based manufacturer of progressive and compound stampings as well as fabrication, CNC machining, steel slitting, and metal finishing services. Matenaer Corporation is based in West Bend, WI.

Americanindust

Website: https://www.americanindust.com/

The American Industrial Company, founded in 1981, is one of the nation’s largest precision and quality driven manufacturers with the highest attention paid to the strict ISO 9001:2015 quality standards. They operate from a modern 25,000 square foot building located 30 minutes North of Chicago O’Hare International Airport.

Mecinc

Website: https://www.mecinc.com/

MEC (Mayville Engineering Company Inc.) has been in business since 1945 and provides prototyping and tooling, production fabrication, coating, assembly, and aftermarket services. In addition to heavy- and medium-duty commercial vehicles, their customers operate in construction, powersports, agriculture, and the military. Besides process engineering and development, MEC maintains a wide range of manufacturing facilities in seven states. As a result, they can provide conventional and CNC stamping, shearing, fiber laser cutting, forming, drilling, tapping, grinding, tube bending, machining, welding, assembly, and logistics. Additionally, MEC offers shot blasting, e-coating, powder coating, wet spray painting, and chemical agent resistant coating (CARC).

Btdmfg

Website: https://btdmfg.com/

The BTD Manufacturing company is based in Detroit Lakes, Minnesota, and they provide small to large-run stamping services, including blanking, progressive, prototyping and die design, as well as tapping and insertion in the die. Additionally, BTD offers assembly, fabrication, machining, tooling, tubing, welding, and finishing services.

Ironform

Website: https://www.ironform.com/

Ironform is a large format stamping company with headquarters in Chicago, Illinois. They are a provider of large format stampings, light and heavy fabrications, and assembly services to the transportation, construction, agriculture, mining, off-road, material handling, and industrial equipment industry.

Gsmwinc

Website: https://www.gsmwinc.com/

General Stamping & Metalworks, located in South Bend, Indiana, offers progressive and line stamping, as well as in-die tapping for high strength steels and aluminum. They can stamp metals up to .5 inches thick at a sheet width of 36 inches or less, and are capable of stamping metals ranging from .04 inches to .5 inches thick.